BLHELI32 / Current sensor / 6S / 65 A / F3 MCU
New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
Supports up to 80A burst and 65A continued. (ESC mounted under props, without anything covered on the ESC)
The latest Tekko32 F3 Metal ESC has got improvements on both performance and appearance. Enhanced BEC, withstand voltage up to 80V.
· F3(M4 Core) MCU, Runs BLHELI32 firmware, the MCU works at 108Mhz
· Mosfet tested at 4S 65A, under props, nothing covered for 1min
· 18 x 27 mm
· Supports Lipo 3-6S
· Ext. cap needed for 6s (330uf 35v for 6s usage.)
· Onboard WS2812B LED
· Weight: 4.4g (1pcs)
This motor idle throttle value can be adjusted in Betaflight configuration, under ESC/Motor Features.
When using dshot, the motor idle throttle value is recommended to be adjusted to “10” percent.
Tekko32 F3 Metal ESC *1
Electrolytic capacito: 330uF 35v *1
24AWG 100mm Black wire *1
24AWG 100mm White wire *1
24AWG 100mm Blue wire *1
16AWG 100mm Red wire *1
16AWG 100mm Black wire *1